West Coast: 626-855-4515                East Coast: 407-851-5525                sales.us@camfive.com

0

×

Registration

Profile Information

For CAMFive machines owners

Login Data

or login

First name is required!
Last name is required!
Company is required!
Telephone is required!
First name is not valid!
Last name is not valid!
Company is not valid!
Telephone is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password only alphanumeric!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

6 Item(s)

  • 26.01.18 0 Posted in Tips By Carlos Alegre


    One of the main functions of the Air Assist is to help prevent the ignition of fire while cutting, especially if you are cutting easily flammable materials such as paper, cardboard, acrylic, fabric and many more. The air assist will blow the flames that may ignite on the surface but not onto the back of the material. Even though the air assist is a key component to prevent the ignition of fire it will never replace the supervision of a trained operator.....

    Read More
  • 26.01.18 0 Posted in Tips By Carlos Alegre


     It is most likely the laser beam bouncing back onto the material; a while ago (and still now) many manufacturers built their lasers with the worktable as a platform.  They had few holes for only fume extraction, these platform provided stability and strength when placing heavy material, however when cutting plywood or acrylic, the laser beam bounced onto the back of the material, leaving ugly marks behind it....

    Read More
  • 26.01.18 0 Posted in Tips By Carlos Alegre


     Even though Laser machines are versatile and can work on a wide variety of materials and surfaces, sometimes the extra help of a different lens can make a difference between a “good enough job” and an amazing job.  There are several types of lenses with similar results in some materials but we will only compare the 2” FL (Focal Length) also known as 50mm vs. the 3” FL (Focal Length) also known as a 75mm....

    Read More
  • 26.01.18 0 Posted in Tips By Carlos Alegre


     It is most likely the laser beam bouncing back onto the material; a while ago (and still now) many manufacturers built their lasers with the worktable as a platform.  They had few holes for only fume extraction, these platform provided stability and strength when placing heavy material, however when cutting plywood or acrylic, the laser beam bounced onto the back of the material, leaving ugly marks behind it....

    Read More
  • 24.11.17 0

    Tags:

    Posted in Tips By Milena Chauncey


    The global temperature has gone down obviously int he past few weeks. If ambient temperature is too low, it may result in water to freeze inside of the CO2 glass laser tubeS & water chillers and causes them to break. So we have to take more precautions, and in this article we have three solutions to avoid any damages.

    Read More

  • Regis and his machineOnce
    you have decided you want to buy a laser cutting and engraving machine, the first step should be to determine your needs, in other words, what are you going to be using your laser cutting and engraving machine for. To determine this, you should have this into consideration:

     

    Read More

6 Item(s)

My Cart

You have no items in your shopping cart.