West Coast: 626-855-4515                East Coast: 407-851-5525                sales.us@camfive.com

0

×

Registration

Profile Information

For CAMFive machines owners

Login Data

or login

First name is required!
Last name is required!
Company is required!
Telephone is required!
First name is not valid!
Last name is not valid!
Company is not valid!
Telephone is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password only alphanumeric!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

CAMFive CFL-CMA2416 CO2 Laser Cutting and Engraving Machine

$4,499.00

Quick Overview

Working Area: 24"x16" Available Power: 70W to 80W 


The CAMFive CFL-CMA2416 is our most compact model and is ideal for business starters or hobbiest. It can fit in a small area and it is designed with our industrial-grade system.

Description
CAMFive manufactures 3 categories of CO2 laser tubes: CFLT-ECO, CFLT-STD and CFLT-PRO. They are manufactured with tempered glass and tested at high pressure with helium to prevent any manufacturing defects. Choosing the right tube: If you are looking to do engraving only, a lower wattage tube would be better. However, if you are looking to cut and want a faster speed, the high wattage tubes are the best. Another factor to be considered will be how many hours will you be using the machine in order to determine how often you will need to replace the tube, since the life span varies depending on the category you choose:CFLT-ECO: Approx. 2,000-4,000 working hoursCFLT-STD: Approx. 5,000-7,000 working hoursCFLT-PRO: Approx. 9,000-11,000 working hours
Description
CAMFive approved ZnSe meniscus lenses are manufactured in USA from Zinc Selenite crystal grown in a plant in Louisiana. They are specially designed to resist high temperatures, have a longer life span and high quality results. We carry different focal distance from 50mm to 100mm for more defined, clean and deeper cuts. Choosing the right lens: The 2” Focal length lenses offer a smaller spot size and are recommended for high definition engraving (Specially recommended to engrave pictures). Both 3” and 4” Focal Lengths offer a longer focal point which in turns gives you a straighter, clean and deeper cut for thicker materials.
Description
We recommend the honeycomb table for engraving and cutting flexible materials and slat for cutting acrylic, wood, plastic or other hard materials.
Description
CAMFive manufactures different cooling systems for laser equipment. We have radiator types like the CW3000 basic system that circulates water through a metal circuit and cools it by fan, recommended for low wattage tubes and if you are planning on using your machine for less than 4 hours at a time. We also have our SL family cooling systems that are electronically controlled to the temperature you want and use a refrigerated system. This allows you to use your machine 24/7 keeping a constant power and extending the life of your laser tube. Recommended for higher wattage and if you are looking for high production.
Description
Various materials release small amounts of fumes and gases in the engraving or cutting process. To extract these fumes and gases, our exhaust system comes equipped with 12 feet (4 meters) of flexible ventilation duct tubing to be installed when the machine is being operated inside a small and enclosed area.
Description
The Air Assist System includes a compressor that helps to supply air to clean smoke & debris from the working area, cool and protect the Laser Head focusing lens, diminish the amount of flaming, scorching, charring from the work piece, and to reduce the chances of ignition when it is working with flammable materials.
Description
A Voltage regulator is important to protect the laser machine’s electrical components and sensitive electronics from high electrical peaks.
Description
Standard shipping varies between 7 to 12 business days and requires a loading dock or a fork lift. Special shipping applies for residential, lift gate or guaranteed date shipping. For other services and international please contact our offices.

* Required Fields

Details

CAMFive laser cutting and engraving machines have been built under our CNC (Computerized Numerical Control) standards & tolerances, using strict manufacturing processes that guarantees maximum stability and minimum wear and tear of its components throughout its lifetime. Our machines can operate 24/7 with minimum downtime, just for periodic scheduled maintenance, depending on the frequency of use, demand of workload, and materials being used. It offers a stable and precise drive system with a German displacement axle and accurate and fast Japanese step driving motors. The optical system has a German designed lens that has been optimized for outstanding performance during cutting and engraving on different materials. The system is available with different options of laser tubes wattage that are digitally controlled guarantying high work quality, great resolution and maximum speed.

Laserable materials

With the CAMFive cutter and engraving laser machines you can create and produce unlimited projects in a wide range of industries such as sign and displays making, customization of promotional items, party supplies and fundraisings, die cutting, trophies and awards engraving, rhinestone templates, embroidery applications cutting, cutting and etching on fabric, leather and other textiles, tags and label marking, wood and acrylic cutting and etching, among others

CYCLE DUTTY

Our machines can operate 24/7 with minimum downtime, just for periodic scheduled maintenance, depending on the frequency of use, demand of workload, and materials being used.

GERMAN DESIGN OPTICAL LENS

The machine comes standard with a 50 mm focal distance lens made with German technology, optimizes laser beam allowing it to produce fine cuts or deep engravings, depending on your requirements. 
Also available 75 and 100 mm focal distance lenses for other applications.
Our 50 mm focal distance lens made with German technology, optimizes laser beam allowing it to produce fine cuts or deep engravings, depending on your requirements. 

GERMAN LASER HEAD X-Y AXIS POSITIONING SYSTEM AND JAPANESSE MOTORS

Its Laser Head positioning system is fast and extremely accurate thanks to its high quality components. Its Stainless Steel Gantry rails and laser head movement system is produced in Germany and its electronic controller motors are made in Japan to ensure maximum precision, reliability and performance. Very dependable and maintenance free.

LCD MULTILANGUAGE OPERATING PANEL

User friendly multilingual LCD Control Panel is incorporated as well as Potentiometers to regulate the laser output power, laser beam on/off button and keyed Security Lock-out switch.

LASER BEAM TRACING SYSTEM – RED DOT POINT

The red dot pointer helps as a reference to check where the laser beam will land on to your material by tracing a simulation of your design without activating the laser. As well as your starting point. (Ask you advisor if included with your system)

“USB” INTERFACE CONEXION PORTS

USB connection panel. The machine comes with a USB input port for flash drives that allows you to load files into the internal memory and USB/Printer port (connection cable included) to connect it directly to a PC.

HONEY COMB OR STRIP WORKTABLE WORKTABLE

Removable honeycomb work table. Recommended when you want to engrave any material or if you want to cut fabric, cardboard, paper, rubber, felt or other type of soft and thin material, also when you cut small pieces. 
Stripped tables with removable strips are also available for an additional charge. Recommended when cutting acrylic or wood to avoid the laser bounce back effect.

AIR ASSIST SYSTEM

The Air Assist System includes a compressor that helps to supply air clearing smoke & debris from the work area, cool and protect the Laser Head focusing lens, diminish the amount of flaming, scorching, charring from the work piece, and reduce the chances of ignition when it is working with flammable materials. (Ask you advisor if included with your system).
An air valve to regulate the air flow is also included. This gives you the versatility to get the best quality on any material you cut or engrave.

ELECTRONIC WATER CHILLER UNIT

The electronic water chiller helps to regulate the laser tube temperature while in operation by keeping the water under room temperature. This is a highly efficient unit that requires minimum maintains. (Ask you advisor if included with your system)

FUME EXTRACTION SYSTEM

Various materials release small amounts of fumes and gases in the engraving or cutting process. To extract these fumes and gases, our CAMFive comes equipped with an exhaust system and 12 feet (4 meters) of flexible ventilation duct tubing to be installed when the machine is being operated inside a small and enclosed area. (Ask you advisor if included with your system).

VOLTAGE REGULATOR

a 2000 VA, 3000 VA or 5000 VA (depending on the model you choose) voltage regulator is provided to protect the laser machine’s electrical components and sensitive electronics. (Ask you advisor if included with your system)

SAFETY FEATURES SUCH AS DOOR SENSORS, EMERGENCY STOP BUTTON

Door sensors to stop the laser beam automatically. Our laser machines are equipped with security sensors and safety features disabling the equipment in case of inappropriate use or unsafe operational conditions. Emergency Stop Button gives the machine operator the ability to IMMEDIATELY and completely shut down the entire machine in case of a problem or any event. The safety turn on Key feature prevents an un-authorized use or operation of the laser machine, allowing only approved operators and/or trained personnel responsible in the operation and maintenance of the equipment.

CONTROL SOFTWARE AND INTERFACE

The control software manages various parameters such as power, speed and resolution in order to achieve the desired results. It is capable of engraving vector and picture files directly. This software is compatible with a large variety of design programs (Such as Corel Draw. Illustrator, Photoshop, Autocad, Wilcom and more)

COMPATIBLE FILE FORMATS:

Supports almost all the design and picture formats such as, bmp, gif, jpg, ai, oux, cut, dsb, dst, dxf, emd, nc, out, plt, smc and more.

CAMFive CFL-CMA2416 TECHNICAL SPECIFICATIONS
Laser-typeCO2 laser tube.
Laser powerECO 70 Watts (ECO 80W and PRO 80W also available) 
Working area24 inch x 16 inch (610 mm x 406 mm)
Work tableRemovable Honeycomb (Stripped also available)
Driving system2-phase step motor driver
Engraving speed0-40 inch/s (0-1016 mm/s)
Max cutting speed0-23 inch/s (0-584 mm/s)
Resolution ratio4000 DPI
Working voltageStandard 220V AC+/- 10% 50-60Hz 15 Amp single phase (110 V AC available upon request).
Operating temperature0-33 °C (0-91.4 °F).
Operating humidity5- 95% Non condensing.
Control SoftwareSmartCarve 3.4 (included) for vectors and graphics processing.
Graphic format supportedBMP, JPG, GIF, JPEG, and JPE.
Vector format supportedai, cut, dsb, dst, dxf, nc, oux, out, plt, smc, yln, ymd, saw, dat.
Precision tolerance0.0079 inch.
Laser output power control1-100% software setting. Manual adjustment integrated.
Highest scanning precision1270 DPI.
Color assignmentUses color property to set layer parameters, speed, and laser min and max power.
Input portsTwo USB 2.0 interface ports for PC and Flash drives
Cooling systemSL-1D Electronically controlled Industrial water chiller (optional).
Extraction systemIndustrial exhaust blower with 12’ of flexible tubing (optional)
Laser beam tracing systemRed dot pointer
Control panelIlluminated, multilingual,  LCD control panel
Safety featuresSafety keyed switch, Safety door sensors, Emergency “STOP” button.
Air assist systemAir compressor (optional) and air flow regulating valve
Voltage regulatorSVC-2000VA (optional)
Machine dimensions53”Wide x 39”Deep x 44”High.
Machine weigh407 Lb.
Crate dimensions60”wide x 44”Deep x 53”high.
Crated weight750 Lb.

CAMFive WARRANTY AND PROFESSIONAL SUPPORT

To make sure your equipment never stops running, in the unlikely event that your equipment needs technical service, we have an extensive inventory of spares parts as well as technical support at any of our two fully stocked facilities in Los Angeles, CA and the other one in Orlando, FL. CAMFive also offers a comprehensive warranty policy for manufacture defects.

MANUALS AND INSTRUCTIONAL VIDEOS

An Operation Manual and instructional videos that contains clear explanations of the Installation process and the usage of the software, the control panel and other features. (For machines only)

TOOL KIT AND MAINTENANCE

A complete set of tools is included for proper assembly and maintenance (For machines only)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

My Cart

You have no items in your shopping cart.